Tubemaster

Using over 40 years of experience in designing and manufacturing of  several ranges of steelworkers and punching machines, Kingsland is proud to introduce the new Kingsland TUBEMASTER, a machine for customers who want fast, accurate, punching of any shape hole (square, rectangualar..etc, which can not be drilled) in square or rectangular tube

The unit will punch tube from 25 mm to a maximum 150 mm outside dimension on one side, and up to length of machine purchased. Tubes up to a maximum of 80 mm outside dimension can be punched right through (top and bottom) in 1 hit.

The mandrel consists of a precision made die connected to a tube that is mounted on a support block; the whole unit is adjustable in the Z-axis by a hand wheel mounted at the 60P machine table.

When punching, the tubes slides onto the mandrel and is punched as it is withdrawn, each size of tube will require a new mandrel, and may require a new bottom die block.

The conveyors consist of 2 units, one left and one right hand mounted. The left hand unit supports and keeps the tube central when punching. The right hand unit supports the tube while feeding. Punching is done as the tube is pulled back to the start position.

Standard features

• 60P Hydraulic Punching machine with 625 mm deep throat and 1 tube punch
• See-through table / work area guard
• Automatic positioning unit  (K210 control, gripper and drive assembly)
• Mandrel (tube die) with tube and adjustable holder with 1 hand wheel
• Conveyor systems with built-in steel rollers, and vertical positioning guides.
• Automatic tool lubrication with 3L oil reservoir