Beam Drill Line
The Kingsland COMPACT machines are universal and compact hydraulic steelworkers with 4 or 5 workstations and are developed for production purposes with maximum efficiency.
They are designed and manufactured using long experience in the manufacturing industry of hydraulic steelworkers.
The hydraulic circuit is activated by a shielded food-pedal. The low power inch mode on each workstation enables the correct work-piece positioning and tool-alignment.
Limit-switches allow accurate adjustment of the stroke length for maximum efficiency. All compact machines have an automatic stroke return function.
Machines are equipped with centralised pressure lubrication being one feature of the low maintenance requirements.
The large punch bed area has a removable front block and is designed to give a very wide range of punching applications
The angle station, provides large capacity angle cutting at 90º and 45º. Angles between 45º and 90º can be achieved by first cutting at 90º and then flange trimming to the required angle in the shearing station.
The shearing station is fitted with a simple mechanical hold down which is adjustable to any thickness of material within the capacity of the machine. The shear feed table with adjustable guides is fitted to allow accurate feeding of materials. The guide can be adjusted to allow mitre cutting up to 45º for flat bars or to trim the flanges of angle
The notching station on the Compact 45 and Compact 60 are fitted as standard with a rectangular notch table with adjustable back stops, allowing repetitive positioning. The Compact 40 has only 4 workstations and so has not nothing station.
The machines are fitted as standard with blades for cutting round and square bars. With extra equipment, the machines are able to cut, in this aperture, channel, joists, T-sections and many other special profiles.
Free standing on suitable floor, they just need electrical connection to be ready to work.
Standard equipment:
- Punch adaptors
- Swing away stripper unit
- Easy change punch holder
- Universal Die bolster
- Heavy duty support tables with guides at shear station and punch station
- Heavy duty supports with guides at not station (not for Compact 40)
- Curved shear arm blade
- Shear body blade
- Set of section cutting blade
- Set of angle cutting blades
- Rectangular notch bolster
- 1000mm ruled length stop (Not on Compact 40)
- Service tool kit
- Work station guards
- Instruction, operating and maintenance manual.
- Hydraulic oil.