Beam Drill Line
The Kingsland multi range of 60 up to 175 ton machines are in the tradition of well engineered, robust steelworkers, built for a long working life.
For two operator utilisation, the hydraulic system is activated by two shielded foot controls, one operating the punch cylinder, the other operating the cylinder for the shear and the notch stations.
The system gives accurate power inching at all five work stations and allows the machine to be stopped at any position giving safe and accurate tool setting and work positioning. Limit switches at both ends of the machine control stroke length at all stations.
The large punch bed area has a removable front block and is designed to give a very wide range of punching applications. A punch table with rules and guides for repetition work are fitted as standard equipment.
The angle station provides large capacity angle cutting at 90º and 45º. Angles between 45º and 90º can be achieved by first cutting at 90º and then flange trimming to the required angle in the shearing station.
The shearing station is fitted with a simple mechanical hold down which is adjustable to any thickness of material within the capacity of the machine. The shear feed table with adjustable guides is fitted to allow accurate feeding of materials. The guide can be adjusted to allow mitre cutting up to 45º for flat bars or to trim the flanges of angle.
The notching station is fitted as standard with a rectangular notch table with adjustable back stops, allowing repetitive positioning
The machines are fitted as standard with blades for cutting round and square bars. With extra equipment, the machines are able to cut, in this aperture, channel, joists, T-sections and many other special profiles.
Centralised lubrication is metered by a one-shot system, being only one feature of the low maintenance requirement.
Free standing on a suitable floor, they just require electrical connection to be ready for work.
Standard equipment:
- Punch adaptors
- Swing away stripper unit
- Easy change punch holder
- Universal Die bolster
- Heavy duty support tables with guides at shear station and notch station
- Heavy duty supports with guides on punch station
- Curved shear arm blade
- Shear body blade
- Set of section cutting blade
- Set of angle cutting blades
- Rectangular notch bolster
- 1000mm ruled length stop with touch and cut
- Halogen Lamp
- Service tool kit
- Work station guards
- Instruction, operating and maintenance manual.
- Hydraulic oil.
Optional equipment:
- Minimum deform stripper
- Hydraulic minimum deform stripper
- Quick tool change
- Large hole attachment
- Sheet bending unit
- Bar bending unit
- Louvre punch unit
- Channel/beam web bolster
- Tube notch unit
- Twin whole unit
- Swan Neck Bolster
- 90° V-notch unit on notch station
- Blades to cut channels
